Jump to content

Leaderboard


Popular Content

Showing content with the highest reputation since 11/19/18 in all areas

  1. 7 points
    Hi guys just wanted to post some images of a few things I've been working on. I've built myself my very own crypto room. I built the entire lot, and proved to be a lot of work, but well worth it. Just wanted to share my work. Framing up of the room Installation of exterior sheeting Flushed exterior joins Installation of insulation Door frame installed Exhaust fan to remove heat in the room Walls flushed Installation of floor Laying of carpet tiles Fitting off data rack Denarius wall logo. I decided I needed a bit of colour on the wall along side the Denarius logo so managed to get a copy of an image of Denario, the D mascot. First I used a projector to project the logo on the wall. Masking tape was used in the wall followed by a scalpel knife to cut out the lettering followed by painting. I've also been working along side Buzz who had helped me get a full screen QT Wallet running on the raspberry Pi 3b+ The wallet runs perfectly on the pi 👌 Latest updates. I've managed to texture paint the outside of the room. Exterior paint + white sand Recently added 10x F1 minis, soon to be 12. Added shelving and work bench to the middle of the room. Recently added 3 x Pi 3B+ cluster to support my network for faster local syncing. Thanks for stopping by Wookie
  2. 6 points
    Denarius's genesis block was created 3 years ago today (6/14/2017). Happy 3 years old Denarius and thank you to everyone for your support of D over the years! Register here on BlockForums.org and make a post in this thread saying how you found Denarius (D) with your Denarius address and receive 1.0 D and 100 BF$!
  3. 6 points
    I found Denarius through my good friend Voon. Never stopped believing since then. Ancient money rules. D6NiCcZCjzcu2HkjBCcNHgwPSVKK55643A
  4. 6 points
    Found it near by many at that time. First saw on stex or it was Carsen twitter. DCHaXhLSSRzKqkj78MLZpZcXLQvSCjVrV8 happy Bday!!! and many others to come!
  5. 6 points
    I've told folks about how I found this coin but here is a much much much more detailed post... It was the year 2011 on June 29th. I was watching a show called The Matrix by Kim Clement, when I first heard about "The Denarii". All of Kim Clement's prophecies were transcribed on his website in the prophecy vault at https://www.kimclement.com/prophecy/. I'll paste related prophecies below so you can understand how I made my discovery that The Denarii was Denarius (D). This was my first clue. I knew there was something called "The Denarii" that was likened to gold. It was something that I could invest in and was going to be stale for a while before having a sudden change. As for that ending there, it's about some of his other prophecies, like his oak tree medical prophecy. For historical tracking purposes, they changed the website text from Denarii to Dinar. I don't have a screenshot of it but I watched the video live broadcast and then watched the recording of it on his website many more times the following months and the actual words that came out of his mouth were "Denarii". If this video is still up by the time you read this, you can see it for yourself here - I know why they changed it to Dinar from his original speech of Denarii and that is because those around Kim wanted to believe that he was talking about the Iraqi Dinar and folks even wrote him letters about it. Btw, the plural form of Dinar is Dinars, not Denarii. So, this prophecy had nothing to do with Iraqi Dinar currency. The next clue, which I didn't understand when I watched it....or else I'd be rich right now...was Kim Clement prophesying that Bitcoin would reach 20,000. Take note, he makes no mention of the Dow but everyone again made assumptions about his prophecy and assumed that he was talking about the Dow. Ask yourself this question...why would the Dow reaching 20k be worthy of prophecy? The Dow reaching 20k is almost a given. That's how the fiat controlled world works. The Dow just keeps going up and up over the years because the USD has a monopoly on the global economic system. Nobody smart would have questioned whether the Dow would reach 20k. Kim does go one after that and mention "BBB". First off, he didn't say it like 3 B's. He was stuttering with the word and he said that God hid the word from him and wouldn't let him see the rest so he only could see the first letter of the word. That is how he described it after he gave that prophecy. You can watch the videos from his show to hear the full description. God wouldn't show him the word Bitcoin because it would have changed the future drastically if he had said that back then. He couldn't say the whole word Bitcoin so he just said you had to "search it out for yourself and find out, BBB". So, there you have it - Kim Clement prophesied that Bitcoin would hit 20,000. This next clue connects The Denarii to bitcoin/crypto. Once again, he never prophesied about the DINAR. He prophesied about The DINARII. And once again, he also never prophesied about the Dow. He said "BBB" and 20,000. Kim Clement could see that there was a connection between his prophecy of the 20,000 and his prophecy of The Denarii. That was what he was trying to convey in his email update but others influenced him into believing his prophecies were about other things. This is why prophets don't watch the news and shouldn't have others interpreting their prophecies for them. I will go into further evidence below as to why it is not the Dow and why it is not the Dinar. Here, he specifically calls it out that it is not Wall Street. Here, he gives you plenty of clues that the Iraqi Dinar has nothing to do with his prophecy. So now that I've determined that Kim Clement's prophecy about "The Denarii" is in fact a crypto because it will have a breakthrough and is related to Bitcoin reaching 20,000, I searched for crypto currency coins that were named like The Denarii. As it is described on the main website - https://denarius.io/#about - we see the following.... We see that the plural form of Denarius is Denarii. Also, Denarius fractionals are called Denarii. For the USD, you can have fractional pieces of a dollar, which are called cents ($0.01 is called 1 cent). For Bitcoin, you can have fractional pieces of a Bitcoin (BTC), which are called Satoshi's (0.00000001 BTC is called 1 Satoshi). For Denarius (D), you can have fractional pieces, which are called Denarii (0.00000001 D is called 1 Denarii). You can also see this in the code... https://github.com/carsenk/denarius/blob/555adee539c4fe99e86dd41f37cc275c45ef7b82/src/init.cpp#L489 https://github.com/carsenk/denarius/blob/555adee539c4fe99e86dd41f37cc275c45ef7b82/src/miner.cpp#L193 // Fee-per-kilobyte amount considered the same as "free" // Be careful setting this: if you set it to zero then // a transaction spammer can cheaply fill blocks using // 1-denarii-fee transactions. It should be set above the real // cost to you of processing a transaction. https://github.com/carsenk/denarius/blob/555adee539c4fe99e86dd41f37cc275c45ef7b82/src/version.cpp#L8 // Name of client reported in the 'version' message. Report the same name // for both bitcoind and bitcoin-qt, to make it harder for attackers to // target servers or GUI users specifically. const std::string CLIENT_NAME("Denarii"); Also, I'm sure how related this is but on the Discord server, a social community chat - https://discord.gg/BwfAmkE - Denarius is often referred to as "The D". This is all the evidence I have on how I came to the conclusion that D was what Kim Clement was prophesying about. A lot of folks, including myself, are wondering how to react to this prophecy about "The Denarii". When Kim receives a prophecy, it's something majorly important. Kim wouldn't prophesy about something so trivial so this has to be big. I mean, if every other coin can jump 1000x in value, why would he specifically call out this one unless it was majority huge and different from the rest. Maybe it's even meant for Denarius to be the coin that overtakes Bitcoin as the leader in the crypto currency sphere.
  6. 5 points
    Was getting back into mining, and looking through the ann's constantly for anything interesting to mine. Came across Denarius which had a lot of people attacking it and became intrigued. Went into the Gitter at the time and saw some big names of crypto in chat. A community like that days into release is something to always follow. 3 years!! DNkF6hSqAJw2egmcACyQ6maSvgPU6RZJYD
  7. 5 points
    I found on the market in the TOR network, silent miner for mining a Denarius with processor. It did not work but thanks to this I became interested in Denarius cryptocurrency DArzuYH8dGcTQWcv5uyf6MRy3zrDpiqPdK
  8. 5 points
    Happy 3rd Birthday Denarius. Ancient Money For A New World.
  9. 5 points
  10. 4 points
    I forgot to mention that I stumbled onto Denarius when one day I saw that it was a profitable GPU mineable coin. So, I downloaded the core wallet searched for a miner and started to mine Denarius with my GPU rig.
  11. 4 points
    I met denarius a long time ago when I saw it listed in some mining pool, then I saw it again in posts of people I follow on twitter. and go into the discord server when I saw that they were friends with a project that I followed from its inception (egem).. D6dQef1Aoe44N8cwWpYvR18fV2c2ZR26By that's a lot more birthdays with the community. denarius is better than btc.. 😉
  12. 4 points
    I first saw Denarius thanks to Buzz and Wookie, i saw them on another discord server and they always talkin and chillin about the D, they are good marketing indeed hahahaha i joined D server and i can say is a wonderful experience cause team always is working to make D better everyday. Is a good team and everyone is making the best. Happy Birthday and wish more years of success ;) :> DGXL4Mtn3wrkvQD4qg3djANx5aUMBfmc27
  13. 4 points
    Hi Buzzkillb, yes it is very fascinating. So many of his prophecies have come to pass that it is hard to ignore this one.
  14. 4 points
    A full tutorial on how to Stake Denarius Coins - D. Staking Denarius is as easy as accumulating Denarius coins, sending into your own QT Wallet and waiting the initial 8 hours for the coins to mature to be ready for staking. First we need to get a Denarius Wallet so we have a D address to use for staking. The place to download the latest wallet is from Github under releases. This has a section for latest released wallets compiled by the main Developer, Carsen Klock. https://github.com/carsenk/denarius/releases Direct Download Links Windows - https://github.com/carsenk/denarius/releases/download/v3.3.9.2/Denarius-v3.3.9.2-Win64.zip MacOS - https://github.com/carsenk/denarius/releases/download/v3.3.9.2/Denarius-v3.3.9.2-macOS.dmg Ubuntu - compile yourself Windows We can store the QT wallet .exe anywhere on your PC. For example, you can make a folder called c:\crypto\denarius and store the QT wallet .exe there. Come up with a location to run the .exe from and copy the .zip you downloaded and paste into this new directory. ctrl+c to copy and ctrl+v to paste, or right click for copy and paste commands in Windows File Explorer. Unzip the Denarius.zip file and you will see denarius.exe. This is the QT wallet. Double click this executable file, and the wallet will start up. In the background the wallet will create a denarius.conf file in the blockchain directory and start to sync. Congratulations, you now have a Denarius address! hint: The blockchain data is defaulted to store in C:/Users/<yourname>/AppData/Roaming/Denarius When Carsen releases a new wallet, all you do is close the wallet, overwrite denarius.exe and double click to run again. MacOS hodl Ubuntu hodl
  15. 4 points
  16. 3 points
    I meet Denarious thanks to ProMineros and I thank them for pointing me to a great project with none stop devs wrking to keep making it one in a lifetime project. Happy 3rd Birthday D DJLyxuoWWVZPfFVdne276Bqe3tdAjU3Hdu
  17. 3 points
    I found Denarius, a real gem of a coin in July 2017 on btct forum, started mining it straight away. Then joined the community with Gitter and stuck to the fabulous community to date. The team goes strong with great leadership and a beast if a developer in Carson! Happy birthday Denarians! Wishing everyone a prosperous year and the many years to come :D DHY3fi2x3agBprHLhK732SZFxhsDxyEVfv
  18. 3 points
    Yeah..Contabo all the way! Best value for the price I've found so far: https://contabo.com/?show=vps The pure-SSD ones are really great, using VPS S SSD & VPS M SSD myself.
  19. 3 points
    Been wondering how to make use of the electrumx server, but in bash. First I needed to connect to the electrumx server. #!/bin/bash echo "get block header" (echo '{"method" : "blockchain.block.header", "params": ["1"], "id": "msg_id"}'; sleep 1) | ncat --ssl electrumx1.denarius.pro 50002 This outputs. block header {"jsonrpc": "2.0", "result": "06000000cd8f82c4c28201fd89def0dba541d66432bff9c1bb16fc1c6201dabb5d0d0000e4abd1522f390c5a2b83add7c8d29b875e1e0691dc43267f0406e9ddfea329c76ab74159ffff0f1e000d8425", "id": "msg_id"} So now to get a balance. The thing with electrumx server is that you need a scripthash to call any address functions. But I don't have that. All I have is a bash terminal and a Denarius address. So what do I do? Line by line dissect how people create an address and then work backwards to the scripthash. I need this image, but down to up. source: https://learnmeabitcoin.com/guide/p2pkh This is not so easy as I can't find anyone doing this backwards in bash. But I found lots of posts how to go forwards. Here is how to get it before converting to big endian. #!/bin/bash . denarius.sh #DUP HASH160 begin="76A914" echo $begin #EQUALVERIFY CHECKSIG end="88AC" echo $end echo "decodeBase58" decoded="$(decodeBase58 DCMRvR6MUppPgP8vrMKuni4FL5de8SjicG)" echo "Remove 00 bytes" echo ${decoded#??} removefront=$(echo "${decoded#??}") echo $removefront echo "Remove checksum" removeback=$(echo "${removefront%????????}") echo "95 characters base58" echo $removeback echo "now what?" echo $begin$removeback$end echo "convert to scripthash" echo -n $begin$removeback$end | xxd -r -p | sha256sum | cut -d' ' -f1 scripthash=$(echo -n $begin$removeback$end | xxd -r -p | sha256sum | cut -d' ' -f1) echo $scripthash Will also need grondilu bitcoin-bash-tools. https://github.com/grondilu/bitcoin-bash-tools Get the bitcoin.sh and throw that into the same directory you are going to test this out in, for obvious reasons I renamed bitcoin.sh to denarius.sh. First I am assuming a standard P2PKH address with OP_DUP OP_HASH160 hashedpublickey OP_EQUALVERIFY OP_CHECKSIG #DUP HASH160 begin="76A914" echo $begin #EQUALVERIFY CHECKSIG end="88AC" echo $end Then decodeBase58 of our Denarius address, works on bitcoin obviously. echo "decodeBase58" decoded="$(decodeBase58 DCMRvR6MUppPgP8vrMKuni4FL5de8SjicG)" Then remove 00 bytes from the front of this. The #?? removes 2 characters from the left of a string. echo "Remove 00 bytes" echo ${decoded#??} removefront=$(echo "${decoded#??}") echo $removefront Now remove the checksum. The %???????? removes 8 characters from the right of the string. echo "Remove checksum" removeback=$(echo "${removefront%????????}") echo "95 characters base58" echo $removeback Now what? How to convert to scripthash? We can echo the the uncompressed public key, kind of. echo "now what?" echo $begin$removeback$end echo "convert to scripthash" sha256 this in proper format, using xxd and then sha256 that. echo -n $begin$removeback$end | xxd -r -p | sha256sum | cut -d' ' -f1 scripthash=$(echo -n $begin$removeback$end | xxd -r -p | sha256sum | cut -d' ' -f1) echo $scripthash At the end from that address I get. 3735fe8239322122222f8a8f42d9b6545bc517e2086116e57953fdc9cc7f6115 For now I have a separate function I found to convert to big endian, since electrumx server wants it this way. source: https://electrumx.readthedocs.io/en/latest/protocol-basics.html#script-hashes #!/bin/bash #echo 6191c3b590bfcfa0475e877c302da1e323497acf3b42c08d8fa28e364edf018b | ./bigendian.sh #8b01df4e368ea28f8dc0423bcf7a4923e3a12d307c875e47a0cfbf90b5c39161 # check stdin if [ -t 0 ]; then exit; fi v=`cat /dev/stdin` i=${#v} while [ $i -gt 0 ] do i=$[$i-2] echo -n ${v:$i:2} done echo I run this like echo 3735fe8239322122222f8a8f42d9b6545bc517e2086116e57953fdc9cc7f6115 | ./bigendian.sh and get the scripthash electrumx server wants 15617fccc9fd5379e5166108e217c55b54b6d9428f8a2f222221323982fe3537 Like bash magic we can use that scripthash to talk to the electrumx server to get a balance. #!/bin/bash echo "get balance" (echo '{"method" : "blockchain.scripthash.get_balance", "params": ["15617fccc9fd5379e5166108e217c55b54b6d9428f8a2f222221323982fe3537"], "id": "msg_id"}'; sleep 1) | ncat --ssl electrumx1.denarius.pro 50002 And we get the balance. get balance {"jsonrpc": "2.0", "result": {"confirmed": 125740854, "unconfirmed": 0}, "id": "msg_id"} And a large step forward in creating a basic terminal wallet for any device that can use bash, ncat and has port 50002 open.
  20. 3 points
    Awesome guide! I'm looking forward to further simplifying and improving the seeder process in the future. Also, I figure I should move any further correspondence about the generic-seeder over to this thread since I sort of hijacked the Duct Tape DNS Seeder thread earlier. In response to your last question from the other thread: I haven't actually played much with tor and onion nodes before, so I can't give a definite YES, but the original sipa bitcoin-seeder has a single onion seed listed (kjy2eqzk4zwi5zd3.onion) and seems to have the necessary plumbing to handle onion nodes, I'm just not sure exactly how to use it. There is a cmd line argument that looks like it may help: -o <ip:port> Tor proxy IP/Port So I assume you need to setup and run a tor instance that is outside of the seeder - something like this https://www.linux.com/topic/networking/beginners-guide-tor-ubuntu/, and then you can run the seeder as per normal with the extra -o argument to pass your tor proxy ip and port so that the seeder can communicate with onion nodes. In theory I think that should be it. Someone please correct me if I am wrong because I'm assuming all of this just from a quick glance.
  21. 3 points
    You are becoming the Bash god !!!. Very nice work.
  22. 3 points
    I found this thread extremely interesting, and I wanted to add onto what InoDenarri has put together which I think certainly holds water. The quote above, I found the recording which you can see here: (it starts at 4:20 right at the end of the video and you can clearly hear Kim say Denarii) What is also very interesting about this prophecy that InoDenarii pointed out is this quote: I spoke recently about the Dow at 20,000 points. All of this connects to a massive breakthrough with regard to the DINAR. At the end of the video you see that Kim says "Denarii, I couldn't even relate it to Iraq". As InoDenarii says, I think he had much influence from his supporters thinking it was the Dinar, but even Kim says he couldn't relate Denarii to Iraq, much means, he didn't get the feeling that Dinarii was linked to the Dinar. The third thing I wanted to point out is around this review of Denarius from a reviewer through Medium and the breakthrough that Kim Clement spoke about. The review is here: https://medium.com/@Luigi1010101/a-decentralized-powerhouse-waiting-to-take-over-7ffe695b1e2 This review is VERY interesting along with the breakthrough that Kim spoke about. First of all reading the review and around the Roadmap part of the review, there isn't one, which means the team aren't stuck with following the herd, it allows them to get creative just like the review quoted: "I have seen that things get done, and I would rather invest in a cryptocurrency with real development then one with a fancy roadmap and no real development. In the Denarius team, there is a lot of creativity and innovation going on. This part makes structure and a “roadmap” difficult. There is a perfectly rational reason behind not being bound to a timeline. They do not want to kill their creativity." So does this mean that because there is no roadmap, the team can explore, create and experiment something unique to the crypto space that is a breakthrough no one was expecting? Something much bigger and better that no one has thought about?
  23. 3 points
    Yeah a Fortunastake is like a rebranded Masternode. You need 5000D to run one. If you have the collateral then Follow these instructions in this Tutorial here..Its for ubuntu 16.04 but has links to help you if you have 18.04 There is also a script that Buzzkill created with a menu That is more straighforward. Look First in the tutorial above how to configure the fortunastake.conf in the qt wallet. Menu version. Choose Ubuntu 16.04, Ubuntu 18.04, or update to latest daemon. bash -c "$(wget -O - https://raw.githubusercontent.com/buzzkillb/d-fortunastake/master/fs.sh)" Good Luck.If you are stuck somewhere feel free to Join our Discord Server https://discord.gg/z5yurUQ where you can find me and others that can help with any issue you have
  24. 3 points
    I'm gonna start off with this guide is an adapation of this topic but for Denarius QT. At this time, I haven't been able to compile the QT with NativeTor or UPNP but when I do figure it out, I will update this thread. 0. Preparing Your System As with compiling every project, you need a compiler for the wallet and all the dependencies. Your patience will be tested multiple times duing the build and you have to be ready to spend a good 5 hours or so depending on the speed of your cpu. There are tools you have to install in order to compile. There are a few programs you should have installed to make the process easier here they are: 7-Zip for extracting files, choose the option appropriate for your system Notepad++ for editing certain files duing the building process Lets us start with MinGW, you can download it from here. That will download and install the MinGW. Once installed and open you should see a screen like this one: Click MinGW and Unmark everything, then click MSYS and unmark everything. Then mark the following items under MSYS: msys-autoconf-bin msys-automake-bin msys-base-bin msys-libtool-bin Its okay for other packages to become marked as you make the above, the others are dependencies. Then go to Installation -> Apply Changes -> Apply it will take a minute to download everything Next you are gonna wanna install the MinGW-builds toolchain from here. While compiling, you are gonna have 2 different cli-type interfaces open, more on that later. Unpack that archive to your drive root, for me that is C:\. Next create a folders in your drive root called deps and Qt. This is where we are gonna compile our dependencies. When all steps completed, your file structure should look similar to mine with all the folders outlined in red: Next we are going to make sure that the MinGW is in your PATH environment variable. To to this on windows 10, Search environment variable in the search on the bottom. You will get a window and on the bottom will be a button that says Environment Variables. Click it and go to the second list where its says System variables and scroll down to Path: If you dont see C:\mingw32\bin; at the front, add it in. You may need to reboot your computer to continue this tutorial, one way you can tell is if you open up command prompt and type gcc -v. If it tells you that gcc is an unrecognized program or file, reboot your computer, if not you are good to go and continue. Lastly make sure that the only file in C:\MinGW\bin should be mingw-get.exe. Now to extracting. 1. Downloading and Extracting Dependencies Here are a list of dependencies for you to download. I suggest downloading each one at a time and immediately starting the next as soon as the former has finished: OpenSSL .tar.gz DO NOT UNPACK YET Berkeley DB .tar.gz DO NOT UNPACK YET libboost 1.57.0 .zip Explorer to deps protoc and libprotobuf tar.gz 7Zip to deps libpng 1.6.16 .tar.gz 7Zip to deps qrencode .tar.gz 7Zip to deps QT Base 5.3.2 .7z 7Zip to QT rename to 5.3.2 QT Tools 5.3.2 .7z 7Zip to QT There are newer versions of QT Base and QT Tools but version 5.13 and 5.12 both have strange errors when attempted to compile. Just use 5.3.2. Once every thing is extracted to your deps folder, it should look like this: And your Qt folder should look like this: 2. Compiling Dependencies Finally time to compile, first you are gonna wanna start with OpenSSL. If you remember, I told you not to unpack it with 7ZIP, we are gonna be using tar in the MinGW shell. To open the shell, open C:\MinGW\msys\1.0\msys.bat and do the following: cd /c/deps/ tar xvfz openssl-1.0.1l.tar.gz cd openssl-1.0.1l ./Configure no-zlib no-shared no-dso no-krb5 no-camellia no-capieng no-cast no-cms no-dtls1 no-gost no-gmp no-heartbeats no-idea no-jpake no-md2 no-mdc2 no-rc5 no-rdrand no-rfc3779 no-rsax no-sctp no-seed no-sha0 no-static_engine no-whirlpool no-rc2 no-rc4 no-ssl2 no-ssl3 mingw make This will change directory to your deps folder, extract OpenSSL, configure and compile it. Next comes Berkeley DB which I also told you not to extract. Do the following in MinGW shell: cd /c/deps/ tar xvfz db-4.8.30.NC.tar.gz cd db-4.8.30.NC/build_unix ../dist/configure --enable-mingw --enable-cxx --disable-shared --disable-replication make After Berkeley DB finishes, we will build libboost in Windows Command Prompt: cd C:\deps\boost_1_57_0\ bootstrap.bat mingw b2 --build-type=complete --with-chrono --with-filesystem --with-program_options --with-system --with-thread toolset=gcc variant=release link=static threading=multi runtime-link=static stage While libboost is compiling, compile protoc and libprotobuf in MinGW shell: cd /c/deps/ tar xvfz protobuf-2.6.1.tar.gz cd /c/deps/protobuf-2.6.1 configure --disable-shared make When protoc and libprotobuf are done, compile libpng in MinGW shell: cd /c/deps/libpng-1.6.16 configure --disable-shared make cp .libs/libpng16.a .libs/libpng.a That last line will rename libpng to a name that qrencode can use. Once done compile qrencode cd /c/deps/qrencode-3.4.4 LIBS="../libpng-1.6.16/.libs/libpng.a ../../mingw32/i686-w64-mingw32/lib/libz.a" \ png_CFLAGS="-I../libpng-1.6.16" \ png_LIBS="-L../libpng-1.6.16/.libs" \ configure --enable-static --disable-shared --without-tools make LIBS sets the libraries for qrencode to compile with. After set, go back to Windows Command Prompt. libboost should be done, if not wait until it is. You shold have renamed the folder QT Base extracts from to 5.3.2, the following requires that it is. Run these commands to compile QT Base and QT Tools. Note* if you have a quad core processor, run all mingw32-make commands with -j4 to speed up the compile time: set INCLUDE=C:\deps\libpng-1.6.16;C:\deps\openssl-1.0.1l\include set LIB=C:\deps\libpng-1.6.16\.libs;C:\deps\openssl-1.0.1l cd C:\Qt\5.3.2 configure.bat -release -opensource -confirm-license -static -make libs -no-sql-sqlite -no-opengl -system-zlib -qt-pcre -no-icu -no-gif -system-libpng -no-libjpeg -no-freetype -no-angle -no-vcproj -openssl -no-dbus -no-audio-backend -no-wmf-backend -no-qml-debug mingw32-make set PATH=%PATH%;C:\Qt\5.3.2\bin cd C:\Qt\qttools-opensource-src-5.3.2 qmake qttools.pro mingw32-make *IMPORTATNT* Now that everything is compiled rename the openssl-1.0.1l directory to openssl-1.0.1j. Finally we are ready for the gritty part of the tutorial, compiling Denarius QT 4. Downloading and Compiling Denarius QT Download which ever version of the repo you want. Beta v3.4 is here, and extract it to whichever folder you like, try to put it in a path without any spaces. the deps folder works just fine. Open up Notepad++ we will need it later. There is one last dependency to compile before we can build Denarius QT, and that is leveldb. It comes packaged with Denarius repo and is located in the src folder of your extracted download. The full path for me is C:\deps\denarius-3.4\src\leveldb. Perform the following in MinGW shell to build: cd /c/deps/denarius-3.4/src/leveldb TARGET_OS=NATIVE_WINDOWS make libleveldb.a libmemenv.a Once compiled you should see somewhere at the end both libleveldb.a and libmemenv.a. In Windows Command Prompt, change directory to your downloaded denarius folder, mine is C:\deps\denarius-3.4, set PATH to include QT Tools and use qmake: cd C:\deps\denarius-3.4 set PATH=%PATH%;C:\Qt\5.3.2\bin qmake "USE_QRCODE=1" "USE_UPNP=-" "USE_NATIVETOR=-" denarius-qt.pro This will configure our build to compile on windows with QT, and QR support and without UPNP and Native Tor. Next you wanna open Notepad++ and edit the Makefile.Release file. Press CTRL+F and search for -levent and delete it. To finally compile Denarius QT, run mingw32-make in Windows Command Prompt and wait: *Note be sure to add -j4 on the end to make it compile faster if you are on a quad core machine!!! mingw32-make If the compilation is stuck on a file for a long time, like 50 or so seconds, press CTRL + C very quickly to force the compilation to continue. This may cause an error at the end saying a file with a .o extention is corrupted or missing. Just delete that file and run the above command again. You will know that the compilation succeded when in the release folder of denarius has Denarius.exe in it. My path being C:\deps\denarius-3.4\release. If you have any questions or comments, post them below and I will try to answer them.
  25. 3 points
    What if we will have more than 500 votes in txbit voting? Free listing should be so great. Would'nt you agree? :)
  26. 3 points
    @Sheila, join our Discord if you want to learn more - https://discord.gg/BwfAmkE - The community is very helpful and supportive. Don't be afraid to ask any questions you may have.
  27. 3 points
    This is a fascinating topic and only something I had heard about recently. So I went digging a bit on the subject and back in 2013, saying bitcoin would hit 20,000 would be pretty prophetic. Quite a bit more than the assumption made about the stock market. The DOW Jones will always go up over time, so this isn't enlightening whatsoever. But if someone was saying something rapid back in 2013 that most people would miss, Bitcoin would have first come to mind out of everything. Oddly as I think about this prophecy matching up to the Denarii, this very well could be the hint. Not too many people are aware of Denarius Crypto just like Bitcoin way back then. This theory isn't being posted on a Kim Clement or prophecy related internet site, so its low key analysis. Its very interesting for someone who doesn't follow this to read the above and really think about it. I hope more finding this particular posts will ask questions, as this is such an intriguing topic and InoDenarii makes my mind spin everytime he talks about this.
  28. 3 points
    Hi Sheila and welcome to DenariusTalk! I'm glad you found my post informative. I followed Kim Clement for many years until his death. I stopped watching the show after that but I still read updates from the House of Destiny emails. To answer you question about bitcoin reaching 20,000 in 2017 and whether we missed out on the prophecy, I don't think we've missed out on the prophecy. Kim didn't give much more details, as most prophecies are like puzzles but I will cover the 2 possibilities. Kim prophesies in 2013 that Bitcoin will reach 20,000, that The Denarii will have a breakthrough, and that those 2 prophecies are somehow related. One way of viewing this is to think that the times are related. This viewpoint assumes that The Denarii will have its breakthrough WHEN Bitcoin reaches 20,000. If Bitcoin reaches 20,000 multiple times then this can be hard to pinpoint. Sure, Bitcoin hit 20,000 in 2017 but then it went down and it looks like it will hit 20,000 again later this year in 2019 if I were to guess at it. If Bitcoin hits 20,000 this year and The Denarii has its breakthrough moment then, we will realize he was talking about the 2nd time that Bitcoin hits 20,000 and not the first. Personally, I'm too attached to the theory on it being time based like the bullet above, though I still think about it as a possibility and my eyes will definitely be paying more attention as Bitcoin approaches near 20,000 again. The other option is to look at the 2 prophecies as being in the same category, which the viewpoint that I hold. This is to look at the November 22nd email as telling us that the 20,000 prophecy tells us about Bitcoin and it is connected somehow to the "massive breakthrough" regarding The Denarii. I see that as them being in the same category. Bitcoin is a cryptocurrency and thus The Denarii must also be a cryptocurrency. That is the way that I like to see it. More on why we have not "missed out on the prophecy" - Kim would never have prophesied about small things. I have not seen any breakthroughs on anything "The Denarii" yet. D coin had a small rise when Bitcoin hit 20,000 but that was too small scale and I don't think Kim would have described what he saw there as a "massive breakthrough". In crypto land, there are tons of altcoins that have similar rises to that. So, if Denarius (D) is "The Denarii" then the "massive breakthrough" and rise in price will be truly historic and have to be even greater than just the average altcoins that can do a measly 10-20x price quickly.
  29. 3 points
    Thank you for this post. I have been racking my brain trying to figure out this prophecy and having my own doubts about it being the Iraqi Dinar. Everything u have said is like the puzzle coming together. Where my confusion is now is that bitcoin reached 20,000 in 2017, so does that mean we’ve missed out on the prophecy??? I’m so excited to have found your post. I had never heard of crypto currency. Please let me know if you have anymore insight on this. Again, thank you for sharing your information!
  30. 3 points
    Now that we have a wallet with address and some Denarius coins, we look at staking your Denarius crypto coins. The way staking works is that D will stake at 6% over the year. 33% of that 6% goes to fortunastake (masternodes). Staking wallets and fortunastakes both help to secure the Denarius blockchain. To get an idea of how much you can receive daily with 100 D. 100 D * 0.06 = 6 D per year 6 D / 365 days = 0.01643835 D per day 0.01643835 D * 0.67 = 0.01101369863 D per day with 33% going to FortunaStakes You can leave your wallet open constantly and help verify transactions and stake frequently, or open your wallet every once in a while to stake. This is up to you. I prefer to leave the wallet open constantly staking, as Denarius is a hybrid cryptocurrency during the Proof of Work and Proof of Stake phase. The safest way to stake your coins is by unlocking the wallet to only stake. Another option if you are planning to transfer Denarius coins to someone else is by fully unlocking the wallet.
  31. 3 points
    After we have a Denarius wallet and address setup, we now need some D coins. Its suggested to have minimum 3 Denarius coins for staking. More Denarius coins will always be better if you want to stake more frequently. There are a couple of basic ways to do this. Buying with Bitcoin using an Exchange Starting off with some Bitcoin we can go into one of the exchanges trading Denarius. Coinmarket Cap list of Exchanges https://coinmarketcap.com/currencies/denarius-dnr/#markets https://www.unnamed.exchange/Exchange/Basic?market=D_BTC https://tradeogre.com/exchange/BTC-D https://www.southxchange.com/Market/Book/D/BTC Come Into Discord for Airdrops https://discord.gg/JQEmXwb Mining Mining is a whole other topic that has its own basic guide. A good list of mining pools https://miningpoolstats.stream/denarius
  32. 3 points
    Thanks for this.Yeah this is more elegant way to do it.
  33. 3 points
    I was asked to chime in on this topic-- keep in mind that as an FPGA developer I am biased, but I will try to create an unbiased suggestion. Firstly, as xover said above, with $0.10 electrical, GPU mining is not profitable at home anymore (at least not 'worth' the trouble for most people). I was a GPU miner (46 cards), I sold them all because my electrical is $0.10. Huge centralized GPU farms have very low electrical rates, and for them, GPU's are very profitable. So, in my mind, 'supporting' GPU mining means you are really just supporting huge centralized GPU farms, which are the only places where GPU mining is really profitable. FPGA mining is profitable at home, with any electrical rate. Anyone can buy a $179 Blackminer F1 Mini FPGA to mine Denarius with the current Tribus algorithm, and the power consumption is only 50 watts. To use an example similar to Denarius, the Verus coin team were not happy when the Blackminer guys released a bitstream to mine Verus coin, so the Verus team 'forked' to 'kick' the FPGA's off their network, and within 3 weeks, the Blackminer team reprogrammed their FPGA's and release a new public bitstream to mine the 'new' Verus algorithm and now F1 owners are mining Verus again-- a huge waste of time by the Verus team, doing a complex and risky hard-fork for no gain whatsoever. Denarius team can do whatever they want with their project, but I repeat that doing anything to try to 'support' GPU mining is just supporting huge centralized GPU farms, and 'forking' to 'kick' FPGA's off the network will keep them off for maybe 2-3 weeks at best. If you truly want FPGA's off the network, you have only two choices of algorithms, ProgPOW and Ethash, which are the only two algorithms that FPGA's cannot mine well at all; but if you choose those algorithms you are choosing to support huge centralized GPU farms which are the only places that can mine with GPU's at any decent profit. Choose wisely!
  34. 3 points
    Wookie bro you did an amazing job, build me a house bro! Lol Buzz killed it on the pi installation!! Absolutely blown away!
  35. 3 points
    Great work!! you are my new hero!! ! really impressed 😮
  36. 3 points
    I think I know what coin chart you can put on the 2nd TV. 🤑
  37. 3 points
    Yea way epic, when are we going to make this our headquarters? Haha really awesome work man! Impressive to say the least!
  38. 2 points
    How to boot from Raspberry Pi4 USB 3.0 SSD. This is a lot easier than it looks, just read through one time to see. I am bypassing installing the OS on an SDCARD to purely update the eeprom, seems like a huge waste of time when it can just be flashed in seconds from a basically blank SDCARD. For this you need, pi4, sdcard, ssd drive, connector for usb 3.0. What I used: Raspberry Pi4 4gb (handy with the hdmi adapter, proper plug, and case/fan) Samsung (MB-ME32GA/AM) 32GB 95MB/s (U1) microSDHC EVO Select Memory Card with Full-Size Adapter (something cheap if you don't have 1, only to flash firmware) Kingston 240GB A400 SATA 3 2.5" Internal SSD SA400S37/240G - HDD Replacement for Increase Performance StarTech.com SATA to USB Cable - USB 3.0 to 2.5? SATA III Hard Drive Adapter - External Converter for SSD/HDD Data Transfer (USB3S2SAT3CB), Black First I am using Windows 10 for this, the steps are basically same for whatever OS. Format your SDCARD to fat32, get bootloader and unzip the files to that drive. bootloader here -> https://github.com/raspberrypi/rpi-eeprom/blob/master/releases.md Under USB MSD Boot find latest, for this guide its this one https://github.com/raspberrypi/rpi-eeprom/files/4781199/rpi-boot-eeprom-recovery-2020-06-15-vl805-000137ad-BETA.zip Unzip that to the root directory of the fresh formatted SDCARD. Insert SDCARD into pi4, and wait a bit for the green light to flash, about 10-15 seconds, powered back on hooked to monitor and it just worked. That's the first part which now makes the PI4 able to boot from the blue USB 3.0 ports. Now hook up your SSD Drive and SATA adapter to your PC. Get Raspberry Pi Imager - https://www.raspberrypi.org/downloads/ Windows - https://downloads.raspberrypi.org/imager/imager.exe macOS - https://downloads.raspberrypi.org/imager/imager.dmg Ubuntu - https://downloads.raspberrypi.org/imager/imager_amd64.deb Run this and select 32-bit and write. To run Headless: Remove the drive and insert back in. Click into the drive and stick a blank ssh file in. For wifi you want to put a wpa_supplicant.conf file in there. wpa_supplicant.conf country=US ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev update_config=1 network={ ssid="NETWORK-NAME" psk="NETWORK-PASSWORD" } Looks like this when done. With or without headless: The next step is to get the latest .elf and .dat files into the root directory of the SSD drive. So make sure after flashing the SSD to unplug and plug back in for Windows to see the new filesystem. https://github.com/raspberrypi/firmware Click clone, then download zip. Double click that downloaded zip and go to the boot directory. Copy the .elf and .dat files to your SSD root directory. At the time of this guide that's 16 files you end up replacing. Now put your SSD/SATA into the pi4 USB 3.0 (blue port) and boot up. The first part will show resizing the drive, the pi4 will then reboot again and go into the OS. The ssh file will allow us to SSH into the headless unit, wpa_supplicant.conf should allow wifi if you aren't using an ethernet cable. Tips: I used a split side by side 4k monitor for this, don't do that as if the pi4 detects weird resolutions, it won't work right. 64-bit Raspberry Pi OS VNC server does not work at the moment, use 32-bit for now. After installed run benchmarks. Nench - Overall Benchmarks https://github.com/n-st/nench (wget -qO- wget.racing/nench.sh | bash; wget -qO- wget.racing/nench.sh | bash) 2>&1 | tee nench.log Raspberry Pi Diagnostics - SD Card Speed Test Click Pi (top left corner) -> Accessories -> Raspberry Pi Diagnostics -> Run Tests After the test runs -> Show Log Test : SD Card Speed Test Run 1 prepare-file;0;0;304818;595 seq-write;0;0;319687;624 rand-4k-write;0;0;71859;17964 rand-4k-read;54979;13744;0;0 Sequential write speed 319687 KB/sec (target 10000) - PASS Random write speed 17964 IOPS (target 500) - PASS Random read speed 13744 IOPS (target 1500) - PASS Test PASS
  39. 2 points
    Guide to installing Qbuntu (Ubuntu 16.04 - Xenial) TemplateVM in Qubes 4.0.2-rc1 fedora-30 as of this writing, I did this on a fresh Qubes install on a Lenovo t450 i7, 8gb ram, 256gb samsung ssd ($280 - ebay) https://www.qubes-os.org/ Basic Idea (but does not work, don't even bother trying to decipher their ubuntu guide as its for someone who somehow knows how to do this already) https://www.qubes-os.org/doc/building-archlinux-template/ Reddit Guide (copying some of the steps from this old guide with some edits to work on Qubes 4.0 as this was written for Qubes 3.2) https://www.reddit.com/r/Qubes/comments/5vzg04/idiots_guide_to_installing_qbuntu_ubuntu_1604/ #gpg stuff from qubes themselves reference: https://wiki.qubes.rocks/Security/VerifyingSignatures Lets Begin Clone your fedora-30 vanilla template into a temporary 'builder' we will use to create Ubuntu templates. [[email protected] ~]$ qvm-clone fedora-30 ubuntu-builder Edit the VM Settings for the newly created template 'ubuntu-builder' (via Qubes Manager GUI), enable 'Allow network access' & increase 'Private storage max size' to 30GB, then start a terminal in ubuntu-builder and initialize GPG [[email protected] ~]$ gpg Break out of "type your message..." with CTRL+C, import Qubes master key [[email protected] ~]$ gpg --recv-keys 0x36879494 Set trust level for qubes master key [[email protected] ~]$ gpg --edit-key 36879494 gpg> trust >Your decision? 5 >Do you really want to set this key to ultimate trust? Y gpg> quit Now retrieve and import Qubes developer keys [[email protected] ~]$ wget http://keys.qubes-os.org/keys/qubes-developers-keys.asc [[email protected] ~]$ gpg --import qubes-developers-keys.asc #install nano [[email protected] ~]$ sudo dnf install nano Install the packages we need to retrieve and run qubes-builder [[email protected] ~]$ sudo dnf install git createrepo rpm-build rpm-sign make python-sh rpmdevtools rpm-sign dialog Retrieve the qubes-builder from GIT repository [[email protected] ~]$ git clone https://github.com/QubesOS/qubes-builder [[email protected] ~]$ cd qubes-builder Edit default config to enable debian_builder only in setup script (example used VI but you can use text editor of your choice, like nano installed above) [[email protected] qubes-builder]$ vi example-configs/qubes-os-r4.0.conf (to check our current version installed, go to Qube Manager -> About -> Qubes OS) Change these lines to look like this DIST_DOM0 ?= fc30 DISTS_VM ?= hint: DOM0 distro being fc30 in this Qubes install, & remove "fc30 buster" from above save and exit (shift-z-z if using vi) Setup qubes-builder and compile the template Run the qubes-builder setup script [[email protected] qubes-builder]$ ./setup Y to add whats missing then yes to add missing keys this failed on me the first time, I ctrl+c and reran ./setup again, did Y again, and it found the keys that were missing after selecting YES, had to even shutdown the qube and try again as it kept glitching out trying to retrieve keys select 4.0 stable dont select current or current-testing (wtf? is this madness) yes (to only build the template) select xenial+desktop with spacebar and push enter select Builder-rpm builder-debian only, nothing else. (I was using the guide to test installing Bionic 18.04 for screenshots) #now you are back at the command prompt and type these in, one by one. The last 2 will take some time so go to Denarius discord and chat with us while waiting. https://discord.gg/7zcwXJN make install-deps make get-sources make qubes-vm make template We have our Ubuntu 16.04 template, now to install it! Qubes-builder should have created an install script, let's make sure it exists: [[email protected] qubes-builder]$ ls -altr qubes-src/linux-template-builder/rpm You should see an 'install-template.sh' file there. Now switch back to your dom0 terminal, and install the template: [[email protected] ~]$ qvm-run --pass-io ubuntu-builder 'cat /home/user/qubes-builder/qubes-src/linux-template-builder/rpm/install-templates.sh' > install-templates.sh Make the copied script executable and run it [[email protected] ~]$ chmod +x install-templates.sh [[email protected] ~]$ ./install-templates.sh #make template (clone) just for denarius, why not in dom0 terminal emulator qvm-clone xenial-desktop denarius-crypto goto qubes-settings for denarius-crypto qube and add your network (I used sys-whonix running tor), run terminal and start to compile the wallet I am choosing color purple background to break out any crypto stuff so I know be careful ignore any errors (pulse audio) #compile denarius QT in template: denarius-crypto sudo apt-get update -y && sudo apt-get upgrade -y sudo apt-get install -y git unzip build-essential libssl-dev libdb++-dev libboost-all-dev libqrencode-dev libminiupnpc-dev libevent-dev autogen automake libtool libqt5gui5 libqt5core5a libqt5dbus5 qttools5-dev qttools5-dev-tools qt5-default git clone https://github.com/carsenk/denarius cd denarius git checkout master git pull qmake "USE_QRCODE=1" "USE_UPNP=1" denarius-qt.pro make -j2 sudo cp Denarius /usr/local/bin #setup appvm with name reference: https://www.qubes-os.org/doc/managing-appvm-shortcuts/ sudo nano /usr/share/applications/denarius.desktop [Desktop Entry] Version=3.3.9.2 Type=Application Terminal=false Icon=/home/user/denarius/src/qt/res/icons/denarius-256.png Name=Denarius GenericName=wallet Comment=Denarius Categories=crypto;cryptocurrency; Exec=Denarius in dom0 run qvm-sync-appmenus denarius-crypto now you can add Denarius to your app selection list in the template select denarius from your template: denarius-crypto and start syncing eet Â
  40. 2 points
    Hmmm, what about this? https://www.mpgh.net/forum/showthread.php?t=1434251&s=8b280877662f74557c038cfc165a3338 That forum seems to have a few, that has the source code which is in Python, but I would still download in a VM to ensure its safe.
  41. 2 points
    looking awesome. Cant wait to try it out
  42. 2 points
    Updated Mobile Version of the forums to show your reputation, post count, and BF$ now.
  43. 2 points
    Introducing BlockForums Points! (BF$) BF$ points are valued at a 100 BF$ to $1.00 USD value. Buy BF$ You can purchase BF$ with Paypal via https://blockforums.org/membersshop/?do=purchasePoints Spend BF$ You can spend your purchased or earned BF$ via https://blockforums.org/membersshop/ Trade BF$ You can donate/send BF$ to any forum member. Earn BF$ You can earn BF$ from the activities below and also gain an interest of 1% per month holding your BF$ in your "Bank" ---------------------------------------------------------------------------------------------------------- How do I earn BF$? You can earn 1 BF$ per quality topic posted You can earn 1 BF$ as the original poster of a topic for each reply You can earn 2 BF$ per best answer picked in our Q/A boards You can earn BF$ from random giveaways and contests in our forums You can earn 1 BF$ for every reaction received on a post or topic ---------------------------------------------------------------------------------------------------------- How do I spend BF$? You can send BF$ to any other forum member You can spend BF$ in our BF$ Shop for all sorts of account upgrades, topic pinning, membership upgrades, and more! ---------------------------------------------------------------------------------------------------------- Terms of BF$ We recommend you enable 2FA on your forum account for better account security if holding BF$. BF$ comes with no warranty, no guarantees, and no liabilities. BF$ is not redeemable for fiat. By purchasing BF$ you agree to these terms and is non-refundable. These terms, pricing, and rewards are subject to change at anytime without warning.
  44. 2 points
    We have upgraded our server for BlockForums.org to much more robust and scalable infrastructure that improve speeds and page load times immensely. Enjoy 😎 The forums are now running on AMD EPYC processors.
  45. 2 points
    thanks a lot for this awesome guide. i didn't know snap rocks that much
  46. 2 points
    After a recent windows update I have a wallet installation that stops with an error as attached png. I do have a backup of a few days previously. Anyone got a recommendation on how to get this back up and running?
  47. 2 points
    Thanks very much! I wasn't sure if it was a separate thing or not, so I wasn't sure which tutorials I should be following. I'll head down that path and I'm sure I'll be back with more stupid questions as I flail around.
  48. 2 points
  49. 2 points
    Denarius v3.3.9.1 Release Notes Get it here: https://github.com/carsenk/denarius/releases/tag/v3.3.9.1 Added ARM/ARM64 Architecture Build Support, You can now build denariusd or Denarius-QT on Raspberry Pis, nanoPi NEOs, ODROIDs, and other ARM platform SoC and devices. This will continually be improved upon and adds a new makefile.arm for compiling on these platforms (1GB of RAM is recommended to run denariusd) New "USE_NATIVETOR=-" flag while compiling Denarius-QT or denariusd, You can now compile without the Tor Library with Denarius, provides greater platform build support for D Denarius-QT Wallet Optimizations, The wallet now runs much faster overall and better responsiveness Added Estimated EUR (Euro) Balance to Overview page in QT Fixed QT Tab Status Texts Fixed and Optimized Staking Icon in QT Wallet Added Travis Building for ease of development workflow Added Snapcraft.yaml for future Snap App Store Support on many Linux Distros (Currrently WIP) Updated README to include Travis statistics and Snap Building listtransactions RPC Command was fixed to show received PoS Fortuna Stake rewards properly Updated denariusubuntuqt.sh and added installd.sh for ease of building Denarius QT and denariusd on Linux platforms (These will be deprecated in the future in favor of Snapcraft/Snap) Updated QT to display more Recent Transactions on Overview Overall optimizations and updates relating to syncing and initial blockchain download. Fixes some segfaults. Added tinyformat.h header for access to tfm formatting C++11 is now supported Fixed Staking Icon when wallet is unlocked for staking only Syncing is now roughly 100x faster on all platforms Added new seed nodes for D Use of null pointers for some invalid return values throughout the QT client. (macOS Mainly) More debug code for Ring Signatures (WIP for v3.4) Thanks to CircuitBreaker, denarius.conf is now created automatically for out of the box configuration Denarius-v3.3.9.1-Win64.zip Hashes: SHA256: CD4867B8EBC78E816CD6B8F58350FD4F2D188577B28317C71D74AC3AD8F263B6 SHA1: B37D3C62DCED18E5CEEF3BB928CC88811CFB3756 CRC64: 27DBF6A87D3EB2FE Denarius.exe (v3.3.9.1 From Win64.zip) Hashes: SHA256: 95688F3BF14AD14AD6FBE961A4D901A24F7218888A0D076419A3ECC545DA202E SHA1: CAFA9209F384F4A9B9A25C6C471C7B15B1E2778E CRC64: 1D5C587587FFA8C7 Denarius-v3.3.9.1.dmg (macOS) Hashes: SHA256: 3B47382D461D66A699DB8D1154CFCF4310EEFA8417438AD787912F40827F844A SHA1: F5B26AED93890F463E35537706728C605B98E9A5 CRC64: 9103CA82DE2239B9 chaindata2022527.zip Hashes: SHA256: 6D63BD068AEB06EDBCFB5CFBC1A082C0E9438041722AF17A2E567E48C838AB87 SHA1: 838F6345B1965DC33DD80CAB01252444E3E51471 CRC64: F4B0ED8E04A1E4FA
  50. 2 points
    Great guide, we need to start building a list of available servers, the more the better.
  • Newsletter

    Want to keep up to date with all our latest news and information?
    Sign Up
×
×
  • Create New...