Jump to content


Popular Content

Showing content with the highest reputation since 06/05/20 in all areas

  1. 6 points
    Denarius's genesis block was created 3 years ago today (6/14/2017). Happy 3 years old Denarius and thank you to everyone for your support of D over the years! Register here on BlockForums.org and make a post in this thread saying how you found Denarius (D) with your Denarius address and receive 1.0 D and 100 BF$!
  2. 6 points
    I found Denarius through my good friend Voon. Never stopped believing since then. Ancient money rules. D6NiCcZCjzcu2HkjBCcNHgwPSVKK55643A
  3. 6 points
    Found it near by many at that time. First saw on stex or it was Carsen twitter. DCHaXhLSSRzKqkj78MLZpZcXLQvSCjVrV8 happy Bday!!! and many others to come!
  4. 5 points
    Was getting back into mining, and looking through the ann's constantly for anything interesting to mine. Came across Denarius which had a lot of people attacking it and became intrigued. Went into the Gitter at the time and saw some big names of crypto in chat. A community like that days into release is something to always follow. 3 years!! DNkF6hSqAJw2egmcACyQ6maSvgPU6RZJYD
  5. 5 points
    I found on the market in the TOR network, silent miner for mining a Denarius with processor. It did not work but thanks to this I became interested in Denarius cryptocurrency DArzuYH8dGcTQWcv5uyf6MRy3zrDpiqPdK
  6. 5 points
    Happy 3rd Birthday Denarius. Ancient Money For A New World.
  7. 5 points
  8. 4 points
    I forgot to mention that I stumbled onto Denarius when one day I saw that it was a profitable GPU mineable coin. So, I downloaded the core wallet searched for a miner and started to mine Denarius with my GPU rig.
  9. 4 points
    I met denarius a long time ago when I saw it listed in some mining pool, then I saw it again in posts of people I follow on twitter. and go into the discord server when I saw that they were friends with a project that I followed from its inception (egem).. D6dQef1Aoe44N8cwWpYvR18fV2c2ZR26By that's a lot more birthdays with the community. denarius is better than btc.. 😉
  10. 4 points
    I first saw Denarius thanks to Buzz and Wookie, i saw them on another discord server and they always talkin and chillin about the D, they are good marketing indeed hahahaha i joined D server and i can say is a wonderful experience cause team always is working to make D better everyday. Is a good team and everyone is making the best. Happy Birthday and wish more years of success ;) :> DGXL4Mtn3wrkvQD4qg3djANx5aUMBfmc27
  11. 3 points
    I meet Denarious thanks to ProMineros and I thank them for pointing me to a great project with none stop devs wrking to keep making it one in a lifetime project. Happy 3rd Birthday D DJLyxuoWWVZPfFVdne276Bqe3tdAjU3Hdu
  12. 3 points
    I found Denarius, a real gem of a coin in July 2017 on btct forum, started mining it straight away. Then joined the community with Gitter and stuck to the fabulous community to date. The team goes strong with great leadership and a beast if a developer in Carson! Happy birthday Denarians! Wishing everyone a prosperous year and the many years to come :D DHY3fi2x3agBprHLhK732SZFxhsDxyEVfv
  13. 2 points
    Hey Guys! Does anyone know of any good aimbots and other cheats for Fortnite?
  14. 2 points
    How to boot from Raspberry Pi4 USB 3.0 SSD. This is a lot easier than it looks, just read through one time to see. I am bypassing installing the OS on an SDCARD to purely update the eeprom, seems like a huge waste of time when it can just be flashed in seconds from a basically blank SDCARD. For this you need, pi4, sdcard, ssd drive, connector for usb 3.0. What I used: Raspberry Pi4 4gb (handy with the hdmi adapter, proper plug, and case/fan) Samsung (MB-ME32GA/AM) 32GB 95MB/s (U1) microSDHC EVO Select Memory Card with Full-Size Adapter (something cheap if you don't have 1, only to flash firmware) Kingston 240GB A400 SATA 3 2.5" Internal SSD SA400S37/240G - HDD Replacement for Increase Performance StarTech.com SATA to USB Cable - USB 3.0 to 2.5? SATA III Hard Drive Adapter - External Converter for SSD/HDD Data Transfer (USB3S2SAT3CB), Black First I am using Windows 10 for this, the steps are basically same for whatever OS. Format your SDCARD to fat32, get bootloader and unzip the files to that drive. bootloader here -> https://github.com/raspberrypi/rpi-eeprom/blob/master/releases.md Under USB MSD Boot find latest, for this guide its this one https://github.com/raspberrypi/rpi-eeprom/files/4781199/rpi-boot-eeprom-recovery-2020-06-15-vl805-000137ad-BETA.zip Unzip that to the root directory of the fresh formatted SDCARD. Insert SDCARD into pi4, and wait a bit for the green light to flash, about 10-15 seconds, powered back on hooked to monitor and it just worked. That's the first part which now makes the PI4 able to boot from the blue USB 3.0 ports. Now hook up your SSD Drive and SATA adapter to your PC. Get Raspberry Pi Imager - https://www.raspberrypi.org/downloads/ Windows - https://downloads.raspberrypi.org/imager/imager.exe macOS - https://downloads.raspberrypi.org/imager/imager.dmg Ubuntu - https://downloads.raspberrypi.org/imager/imager_amd64.deb Run this and select 32-bit and write. To run Headless: Remove the drive and insert back in. Click into the drive and stick a blank ssh file in. For wifi you want to put a wpa_supplicant.conf file in there. wpa_supplicant.conf country=US ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev update_config=1 network={ ssid="NETWORK-NAME" psk="NETWORK-PASSWORD" } Looks like this when done. With or without headless: The next step is to get the latest .elf and .dat files into the root directory of the SSD drive. So make sure after flashing the SSD to unplug and plug back in for Windows to see the new filesystem. https://github.com/raspberrypi/firmware Click clone, then download zip. Double click that downloaded zip and go to the boot directory. Copy the .elf and .dat files to your SSD root directory. At the time of this guide that's 16 files you end up replacing. Now put your SSD/SATA into the pi4 USB 3.0 (blue port) and boot up. The first part will show resizing the drive, the pi4 will then reboot again and go into the OS. The ssh file will allow us to SSH into the headless unit, wpa_supplicant.conf should allow wifi if you aren't using an ethernet cable. Tips: I used a split side by side 4k monitor for this, don't do that as if the pi4 detects weird resolutions, it won't work right. 64-bit Raspberry Pi OS VNC server does not work at the moment, use 32-bit for now. After installed run benchmarks. Nench - Overall Benchmarks https://github.com/n-st/nench (wget -qO- wget.racing/nench.sh | bash; wget -qO- wget.racing/nench.sh | bash) 2>&1 | tee nench.log Raspberry Pi Diagnostics - SD Card Speed Test Click Pi (top left corner) -> Accessories -> Raspberry Pi Diagnostics -> Run Tests After the test runs -> Show Log Test : SD Card Speed Test Run 1 prepare-file;0;0;304818;595 seq-write;0;0;319687;624 rand-4k-write;0;0;71859;17964 rand-4k-read;54979;13744;0;0 Sequential write speed 319687 KB/sec (target 10000) - PASS Random write speed 17964 IOPS (target 500) - PASS Random read speed 13744 IOPS (target 1500) - PASS Test PASS
  15. 2 points
    Also found these on Github, not sure if clean or viruses, so do your own due diligence: https://github.com/llevene/FORTNITE-HACK-1 https://github.com/vjeko71/ForniteSangria-Cheat https://github.com/THEGUY3ds/FortniteSourceCode
  16. 2 points
    Hmmm, what about this? https://www.mpgh.net/forum/showthread.php?t=1434251&s=8b280877662f74557c038cfc165a3338 That forum seems to have a few, that has the source code which is in Python, but I would still download in a VM to ensure its safe.
  17. 2 points
    The cheat on csjoke is a scam and registration on aimforest is closed, the only way to register is through a reference.
  18. 2 points
    https://www.aimforest.com/cheat-detail/fortnite-aim-esp-undetected-hack-cheat AimForest seems like it could be decent and then this Fortnite Aimbot posted on this other forum: https://cs-joke.pl/thread-19704.html I would be wary and run them in a VM or sandbox first to ensure nothing fishy, https://hybrid-analysis.com does a good job of scanning a malicious file directly from a link as well.
  19. 2 points
  20. 2 points
    Merry birth period D! I found D because a bitstream was released for some FPGAs I had. DDz3HteeKBb8zTo2yywsqurwtDMLUUdfHh
  21. 2 points
    Denarius was the first coin I ever mined. This was the project that started me into crypto. I love the people on the the team and the passion that everyone has.
  22. 2 points
  23. 2 points
    https://github.com/carsenk/dpi One line install wget -qO- https://raw.githubusercontent.com/carsenk/dpi/master/installdpi.sh | bash
  24. 1 point
    Start Trading Learn to Trade Affiliate Program Help About Us Privacy Policy Terms & Conditions Contact Us
  25. 1 point
  26. 1 point
    Seed Phrase Management/Wiping Device/Setting/Changing PIN/BIP39 Password all now supported!
  27. 1 point
    Yup lol, KeepKey now partially integrated! Connect to your Keepkey by running Kronos on your localhost over WebUSB, You can then view your Address #0 and xpubs of your Denarius address derivation from your BIP39 seed phrase used/stored on the device. You can then view transaction history and balance of the address, Transaction signing will be coming soon. More KeepKey integration soon! Wiping your device, Setting/Chaning your PIN, and Recovering (Setting a seed phrase) to your KeepKey with or without a BIP39 passphrase are coming soon!
  28. 1 point
    How to update keepkey firmware in Windows. If you don't have a keepkey, use Carsen's referral link and go buy one https://amzn.to/2CUvQvk Download the updater - https://beta.shapeshift.com/updater-download# Run and wait for No Device Connected screen. Plug in keepkey, click Update Now. Select your option. Mine is new so This Keeykey is New. Unplug the keeykep, plug it back in while holding down the button. Hold down the button. Looks like this on device. Hold the button down until that arrow on the keepkey itself turns into a checkmark. On reconnect the bootloader will update. Hold down button and reconnect. Now time to update firmware. Click Update Now. Hold down the button again and wait for the checkmark, do not unplug yet. Unplug the keeykep and plug back in. And now its all updated. Reconnect while holding the button down to check firmware. All done.
  29. 1 point
    Tons of updates to Kronos! So many to list! Kronos v1.3.2 -New Terminal! (Access the terminal of your device Kronos and Denarius are hosted on) -Generate and Convert Denarius Minikeys directly in Kronos now! -Kronos Local LevelDB for storing encrypted data -During the first launch of Kronos you will prompted to create a username and password for your install which is then encrypted and stored in your new local Kronos leveldb -View your newly locally generated 24 word BIP39 seed phrase, the addresses currently derived from it are password protected with your password you setup when you start Kronos for the first time, These are not currently used for anything and are also stored encrypted to your local leveldb (kronosleveldb) for possible future use. -Mobile Friendly Updates (Still maybe some things and some reworking) -Start of ES6 support for more internal progress -ElectrumX Server Cluster Support, Now Kronos clusters its list of Denarius ElectrumX servers for failover redundancy if one goes offline or has issues connecting (Currently 3 online 24/7) https://status.denarius.pro -New Kronos Denarius Block Explorer! View Addresses, Transactions, and Blocks! You can now also search via the search in the top right -New Peers page to view your Denarius peers -New Logout Option under the new "Gear" menu in the top right -Some other random updates, bug fixes, and styling updates GET KRONOS: https://github.com/carsenk/kronos
  30. 1 point
    How to easily swap or change endianness in Javascript, NodeJS, etc. with one simple function! changeEndianness() const changeEndianness = (string) => { const result = []; let len = string.length - 2; while (len >= 0) { result.push(string.substr(len, 2)); len -= 2; } return result.join(''); } You can then use this function with any string to convert its endianness Example of using function: var yourstringvar = 'Your string goes here to swap endianness'; var newendian = changeEndianness(yourstringvar); console.log('Your newly swapped endian string', newendian);
  31. 1 point
    So not a lot of information out there, but if you want to convert a Bitcoin or Denarius or any standard crypto typically, you take the block hex to a block hash (typically used for block explorers and things) you just do the following: changeEndianness(SHA256(SHA256(BLOCKHEX))) So basically visually in text it would be: BLOCKHEX => Hashed to SHA256 => Hashed to SHA256 => Swap Endianness = Block Hash You are just hashing the hex twice and then swapping the endianness to obtain the hash of the block.
  32. 1 point
    Happy 3rd! Was searching for good coins to mine a few years back and found Denarius - started mining and FPGAs hit the chain Through the tough times and the good, came back for a Stake or Two DNj8oCuSXDCV7iLaQeNa9mkhHMvjkgToph
  33. 1 point
    Got it up and running, using 15M right off the bat 🤣 lets hope this increases the longevity of the SD Cards You can also install it via their repo echo "deb http://packages.azlux.fr/debian/ buster main" | sudo tee /etc/apt/sources.list.d/azlux.list wget -qO - https://azlux.fr/repo.gpg.key | sudo apt-key add - apt update apt install log2ram
  34. 1 point
    Say you see a coin's promotional materials for an ICO and want to archive that as they change their specs on the fly, leading up to their mainnet release. How would someone go about this? Denarius has a great feature built into the wallet called Proof of Data which will hash the file. Along with this a user can upload that file directly to IPFS for archiving purposes. The POD then would act as showing that uploaded file is the same unchanged file. Lets begin with an example of how to do this. https://www.ghostbymcafee.com/ It's been a while since I have seen a countdown timer on a mainnet release, so I was curious what they are offering. Reading both PDF's being offered shows something isn't right. What are the odds they change this after they got everyones' money upfront before the timer counts down to release? Who knows, so lets archive now and find out later. https://www.ghostbymcafee.com/pdfs/Ghost_by_McAfee_Litepaper_v1.0.1.pdf First I download the Lite Paper. Then I go to the proof of data tab in the QT wallet, Select File, enter narration and then click Create Timestamp. On success we get a Denarius address as the POD file hash. D address: DHe18hHTHtQKbe5h8vTZ1xpPMZvx7zfYL8 tx hash: bc574da851172857377146c9cfcd4ebb5cb5ea1508e678bc67587a7cba42a585 Then go over to the Jupiter Tab and select the same file. I want to POD the IPFS upload as that timestamps when I archived this into IPFS itself. After paying a small fee we get all the rest of the information. IPFS CID/Hash: QmSJeCZdffCqyG133MHt3JGqRrn2pSV4YraYfw6DU4SFqe Denarius Jupiter POD Address: DH9Gr5HxHDgvsJc4dhVsaNnSEkTRXwS535 Denarius Jupiter POD Transaction ID: 8a2b52571140b5cccdfacb48f5bb12d0a718a0966213695b02c2e702a3aa58c7 Can then click on View Upload file on Infura to get the Link, pretty neat. https://ipfs.infura.io/ipfs/QmSJeCZdffCqyG133MHt3JGqRrn2pSV4YraYfw6DU4SFqe Let me add the details from the 2nd PDF. https://www.ghostbymcafee.com/pdfs/Ghost_by_McAfee_Whitepaper.pdf D address: DJAzjVvgfHyaP3UAHS4SA6eWGkeYFqWeUW tx hash: e2f878428ee5217b4020de39961b5da0882155b9293720439b99d809dfd27f67 IPFS CID/Hash: QmR8FpPLzTZzYcbpyHL7nsiyLdp5dLJj8Z9t5Caf5zE2Dm Denarius Jupiter POD Address: D89F1AjQDTtgSs8HU3e5fmxLGwsGfzRPBb Denarius Jupiter POD Transaction ID: 1661258c6c85536168828cce7aa73bcbc682f52e17b31e10474ce61cbc62fcbe https://ipfs.infura.io/ipfs/QmR8FpPLzTZzYcbpyHL7nsiyLdp5dLJj8Z9t5Caf5zE2Dm I will leave it up to the user why I am showing this and comparing to 2 pieces of ICO material together showing different coins.
  35. 1 point
    I still do not understand how 1 container can be used and also compact the database. When electrumx is stopped, the container shuts down. If anyone knows please let me know. How to getinfo from the command line outside of the docker container. docker exec -it electrumx /electrumx/electrumx_rpc getinfo Or get into the container itself and run commands. docker exec -it electrumx sh Add a peer docker exec -it electrumx /electrumx/electrumx_rpc add_peer "electrumx1.denarius.pro v1.15 s110 t"
  36. 1 point
    Pathway free until June 25, 2020. https://www.epicgames.com/store/en-US/product/pathway/home "Explore the strange unknown with Pathway, a strategy adventure set in the 1930s great wilderness. Unravel long-forgotten mysteries of the occult, raid ancient tombs and outwit your foes in turn-based squad combat!"
  37. 1 point
    I found Denarius on the new listings tab on CoinMarketCap just a few days after it was listed and looking at the project and low cap pulled me in and since then I have always believed in the project. DRNfj8JwLZrMcuaoDXePZtzYXiRCpaeS5e
  38. 1 point
    To see the coinage, which is an estimate of how much a FortunaStake would get from staking I setup this site. https://pos.watch/coinage/ A user can input their address and find what they can stake.
  39. 1 point
    Ark: Survival Evolved free until June 18, 2020 on Epic Games. https://www.epicgames.com/store/en-US/product/ark/home
  40. 1 point
  41. 1 point
    Decided to try out Pfsense to compare to the Ubiquiti USG with VLAN's. Pfsense seems a bit easier, but a few more steps to setup. With that in mind I wanted to see how to VLAN a Proxmox Container. I am using a small celeron - 2 Intel NIC mini PC for Pfsense, a Ubiquiti Edgeswitch 24, and for Proxmox - Threadripper 16core on an x399 motherboard with 2 Intel NICS. I think you want 2 NICS for Proxmox, and a managed switch. First setup the VLAN on Pfsense. I am calling mine DockerProxmox and using vlanid 600. Go to Interfaces -> VLANs click Add and change to something like below Parent Interface is your LAN, VLAN tag is 600, Description Docker Proxmox. LAN is important and the rest is up to you. Go to Interfaces -> Assignments and find the one at the bottom, your new VLAN and click Add. Then Click OPT or whatever the Description is. Once you click Description change the fields below. Pick an IPv4 address for the new subnet, I chose Go to Services -> DHCP Server and find your new VLAN at the top and click that. We now want an IP range to hand out. I like to choose between 100-200 like below. Go to Firewall -> Rules. A quick firewall rule to to allow traffic and also block traffic to the rest of the network which will look like this. Allow All Rule Block LAN Rule Then go into your Switch to configure the Tag Port, this is going to vary but here's an example on my Port 20. So you already have Proxmox setup with a static IP on one of the NICS. Now lets use the 2nd NIC to bring the VLANs through. The above shows I have my management Proxmox port on 19, and the 2nd VM NIC will be in Port 20. This is the goal of what we are about to change. enp4s0 is plugged into port 19 like normal and was setup through Proxmox as vmbr0 when I setup the server. So then I would click create Linux Bridge and make a vmbr1 with VLAN aware and bridge port of the other NIC, enp6s0 like this. Now create a container using vmbr1 and use VLAN ID of 600 or whatever number you used and the container will get the new IP range from DHCP and can't ping any other IP's outside of the range. On the Container creation, it would look like this for Network tab. For DNS tab, I am using my pihole IP address which I made 2 separate rules for, otherwise I could not get out to the internet because of the above rules and basically blocking my pfsense IP. Looks like this below. Eventually would tune everything down to correct ports only, so I am not passing everything to the pihole. Or just use or whatever you use in the DNS tab. And a successful ping to google.com so big brother knows we are here, but can't ping internal network. Good enough for a somewhat quick Pfsense VLAN into a Proxmox Container to start locking things down.
  42. 1 point
    Epic guide bro [emoji123][emoji817] this will come in handy at some point for myself
  43. 1 point
    Download Thaiphoon Burner freeware edition, its basically free for this. http://www.softnology.biz/files.html Download DRAM Calculator https://www.techpowerup.com/download/ryzen-dram-calculator/ Open Thaiphoon Burner and click Read, then select one of your RAM slots. Pick one of your ram slots here. After you read the slot, then select Report. In Report, scroll all the way down and click Show delays in nanoseconds. Then click Export. Click Complete HTML Report, and save this somewhere easy to find. Open up DRAM Calculator and Import XMP using that Complete HTML Report file. With the RAM settings imported, now click Calculate SAFE or Calculate FAST. I am selecting SAFE. Now I have a good starting point for my BIOS, as I am currently having issues getting 3200 4x16GB working on my x570 Asus TUF Wifi motherboard.
  44. 1 point
    FortunaStake page is heavily under construction as well, just added sorting of FS via Rank or any other category:
  45. 1 point
    I will officially release it soon, bare in mind it is still an Alpha so things may break or not work properly, but I am looking to get any and all feedback, so please share anything you find!
  46. 1 point
    Installer was heavily updated and tested on Ubuntu 16.04/Ubuntu 18.04/Ubuntu 20.04 as well and now includes an update option and an option to install dPi with Denarius chaindata (It will intelligently pick what architecture you are on for the correct chaindata download)
  47. 1 point
    A ton of updates have been made to the installer and dPi itself, unused node modules were removed, used ones were updated, dPi now uses Node v8 and installs nvm. There is now a Tools menu with a good amount of new tools including Backing up your wallet, Importing private keys, Signing and Verifying Messages, and broadcasting raw transactions. More updates coming soon!
  48. 1 point
    Overcooked free on Epic Games until June 11, 2020. https://www.epicgames.com/store/en-US/product/overcooked/home
  49. 1 point
    Cool, I'll try this soon. Awesome guide!
  50. 1 point
    Install Denarius snap in an appVM clone debian-10 to debian-10-crypto go to debarian-10-crypto terminal sudo apt update sudo apt install snapd sudo snap install denarius close the terminal and shutdown the qube go to qube settings->applications click refresh applications and Denarius will pop up, click apply and ok Create AppVM (This is where you run your app, store the blockchain and wallet.dat) Go to Qube Manager -> Qube -> Create new qube Name: Denarius-QT Type: Qube based on a template (AppVM) Template: debian-10-crypto networking: default (sys-firewall) or sys-whonix checkmark: launch settings after creation Give this a color After creation in settings, go to Applications and bring Denarius into this Qube so you can run the QT from here, I also gave this 10gb of private storage space as the blockchain is currently over 4gb. If you want to run the daemon just go into the Denarius appVM and run denarius.daemon, otherwith the QT is now on the menu. NOTE: If up sudo apt upgrade debian, the snap list of apps goes away, do the refresh applications and re-add Denarius again like above to debian-10-crypto and then Denarius appVM. Nothing gets lost, it just loses the easy click menu button. NOTE2: If you use sys-whonix, its gonna take a long time to find peers and start syncing. Download chaindata.zip which has the peers.dat in there and the whole process is a lot faster.
  • Newsletter

    Want to keep up to date with all our latest news and information?
    Sign Up
  • Create New...